edit
Wiki Currently Under Major Revision
This is not perfect documentation. This is a shared space for us to keep the most helpful and accurate things each of us knows or learns about our tools. We need your help! If you are willing to share what you learn with others, please request editor access in the mfx-wiki channel on slack. No special skills or experience required.
Creality 3D Printers
Jump to navigation
Jump to search
edit
NOTICE!
No ABS! Recommend PLA. Contact 3D Printing Point-of-Contact for assistance with PETG
Pre-Flight Instructions
Once these steps are completed, they do not need to be completed before each and every print in a given session. They only take a few minutes to complete and it will ensure you have a good experience with the printer.
| Step | Text Instructions | Video Instructions |
| 1 | TODO: Setting nozzle height | Setting nozzle height |
| 2 | TODO: Instructions if you need to unload filament | Need volunteer! |
| 3 | TODO: Loading filament | Setting nozzle height (9:17 to 9:54) |
Creality Printers at MakerFX
The Creality printers DO NOT have Octoprint (yet). Use Simplify3D on the 3D Printing PC to slice your object and manually copy to SD card.
CR-10 Mini |
 |
| Slicing=Simplify3D |
| 300mm x 220mm x 300mm |
| Heated Bed = Yes |
| Nozzle = 0.40 |
Consumables
- Hairspray
- Tape
- Purple Disappearing Glue Stick